← All Articles

French Creek sits right between Parksville and Qualicum Beach, and it’s a pocket that sees a steady stream of renovations — homes getting updated, kitchens and bathrooms redone, decks and additions going in. Every one of those projects produces the same thing besides a nicer house: a pile of waste that has to go somewhere.

Handled well, renovation waste is a non-issue — a bin on-site, filled as you go, hauled away when you’re done. Handled badly, it’s a growing heap in the driveway and a dozen trips to the transfer station. Here’s how to do it the easy way.

What goes straight in the bin

The bulk of renovation debris is exactly what a bin is for:

  • Demolition material — drywall, plaster, lath, old cabinetry, and trim
  • Flooring — carpet, underlay, laminate, tile, and hardwood
  • Lumber and framing offcuts
  • Roofing — shingles and underlay from a tear-off
  • Fixtures and general reno junk

For a full accepted-materials list, see what can go in a rental bin.

What needs special handling

A few things can’t just go in with everything else, and knowing them upfront saves you a rejected load or a surcharge:

  • Drywall is accepted, but in BC it comes with rules around asbestos testing on older material. If your French Creek home predates the mid-1990s, read our drywall disposal guide before demo day.
  • Hazardous materials — paint, solvents, and similar — don’t go in a mixed bin.
  • Large appliances like fridges need special handling.

We keep the banned and restricted list clear in what you can’t put in a rental bin so there are no surprises at pickup.

Sizing the bin for a reno

The right size depends on the scope:

  • A single-room reno (one bathroom, a small kitchen) — a 15-yard bin usually covers it.
  • A bigger renovation, a roof tear-off, or a whole-floor gut — step up to a 20-yard.

Ordering too small means a callback for a second bin; too big means paying for space you don’t use. How to choose a bin size walks through it, and for roofing specifically, our roof tear-off guide covers timing and sizing.

Keep the site clear as you go

The best renovations keep the debris moving, not piling. A bin on-site lets your crew — or you — load waste the moment it comes out, so the work area stays safe and clear. When you’re running both demo and any ground work on the same project, it can make sense to combine the bin and excavation into one visit.

Renovating in French Creek? Request a quote or see our bin rental options and we’ll help you size it right the first time.

FAQ

What size bin do I need for a renovation? A single-room reno usually fits a 15-yard bin; a larger renovation or roof tear-off calls for a 20-yard. We can help you match the size to your scope.

Can I put drywall in the bin? Yes, but BC has asbestos-testing rules for older drywall. If your home predates the mid-1990s, check our drywall disposal guide before demolition.

What renovation waste isn’t allowed in the bin? Hazardous materials (paint, solvents) and large appliances like fridges need special handling. Everything from demo to flooring to roofing generally goes straight in.

Can I keep the bin for the whole project? Yes — a bin on-site through the reno keeps the work area clear. Fill it at your own pace and we’ll haul it when you’re done.